Sunday October 4, 2009

Boat still upside down from work doing fillets under seats last week. Checked them. Used a file and sandpaper-on-a-stick to smooth the edges of ports into the forward and aft storage areas. Likewise smoothed the edges of the through-way under the middle seat. Cut out some fiberglass bubbles and rough edges and sanded some. Realized I hadn’t done fillets under the breastplates last week. Mixed clear epoxy and used foam brush to coat the smoothed port edges of the storage areas. Mixed fillet epoxy and did the fillets under the breastplates. (Found the smaller fillet stick David had made; worked much better than the ones I used last week.) Meanwhile, David cut out a few fiberglass bubbles from the outside of the hull. I then took clear epoxy and covered the bare areas that resulted. He also did some sanding on the hull.

He did not want to start putting on the first epoxy coat on the outside hull. Said he might come back Monday and do it.